TX-A2 independent video player

The program can be completed independently, no need to use a dedicated playback computer, to prevent the crash, blue screen, screen saver and other faults caused by computer hardware and software.

The playback effect of the synchronous online sending card is achieved, and the transmission mode of the offline card no longer requires the dedicated network cable to work.

Supports any control computer in the same network or LAN across the network segment for screen control and playback content replacement.

The content can be directly played by the USB disk, eliminating the trouble of wiring. When the program needs to be changed, the program is completed on the production computer, copied to the U disk, and the U is inserted into the independent player, and the playback content can be directly played or copied. Then remove the U disk.

The network access certificate is added and can be controlled via the Internet to provide BS system services.

It is processed by a large-capacity FPGA, and two Gigabit Ethernet ports carry a receiving card control display. The on-load LED display has a maximum of 1.3 million points. The TX-A2 display resolution supports up to 1920*1080 resolution and 24-bit true color mode. Connect the receiving card as described to maximize the 3840*256 long display.

It has an audio output port for simultaneous playback of video and sound. The volume can be controlled remotely or at a fixed time.

Temperature and humidity measurement, noise measurement, and brightness measurement can be provided to increase the function of automatic or time switch.

It can be connected to 3G or 4G wireless routers to transmit display data wirelessly.

Two gigabit output ports output, the maximum control point is 1.3 million points.

With HDMI output interface, it can be used for LCD monitors.