Model	DT-600F Single Output Standard
Input Voltage Range	100-132VAC          200-240VAC	47-63Hz
Input Current	5A/230V
Inrush Current	Cool Start 60A/230V
Leakage Current	< 1.0MA/240VAC
Voltage Adj. Range	Rated Output Voltage ±10%
Overload Protection	Rated Output Current 105-150%
Over Voltage Protection	115-130%
Set Up, Rise Time	200ms    50ms
Hold Up Time	20ms (Typical Value)
Withstand Voltage	I/P-O/P:1.5KVAC 1min
	I/P-FG:1.5KVAC 1min
	O/P-FG:1.5KVAC 1min
Working Temperature	-20℃~+50℃
Working Humidity	20%~90% RH
Cooling Method	Fan Cooling
IP Grade	IP23
Remarks:
1. If not specified, all testing parameters are tested under the AC 230V and environment of 25℃ with rated load.
2. The ripple wave and noise of power supply is tested in 20MHz brandwidth by the output of power supply in paraller with a 0.1uF and 47uF capacitance.
3. Tolerance: Including the set tolerance, linear adjustment rate and load adjustment.
4. The power supply is regarded as the module which will be installed in the end equipment. The end equipment must recheck and it still complies with EMC directive.
5. If there is no output when the power supply is in short circuit, is will recover after removing the load.